[ 0.000000] Linux version 5.10.70-eisfair-1-SMP (root@basebox32) (gcc (eisfair Linux) 10.3.0, GNU ld (GNU Binutils; eisfair-1) 2.36.1.20210326-3) #1 SMP Sun Oct 3 17:29:09 CEST 2021 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da85dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da85e000-0x00000000da8a5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da8a6000-0x00000000da8adfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da8ae000-0x00000000dabdcfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dabdd000-0x00000000dabe9fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dabea000-0x00000000dac11fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dac12000-0x00000000dac54fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dac55000-0x00000000dae8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae90000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: /DH67CL, BIOS BLH6710H.86A.0163.2018.1023.1559 10/23/2018 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2494.201 MHz processor [ 0.000526] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000529] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000539] last_pfn = 0xdb000 max_arch_pfn = 0x100000 [ 0.000544] MTRR default type: uncachable [ 0.000545] MTRR fixed ranges enabled: [ 0.000546] 00000-9FFFF write-back [ 0.000547] A0000-BFFFF uncachable [ 0.000548] C0000-CFFFF write-protect [ 0.000549] D0000-E7FFF uncachable [ 0.000550] E8000-FFFFF write-protect [ 0.000551] MTRR variable ranges enabled: [ 0.000552] 0 base 000000000 mask F00000000 write-back [ 0.000553] 1 base 100000000 mask FE0000000 write-back [ 0.000554] 2 base 0DB800000 mask FFF800000 uncachable [ 0.000555] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000556] 4 base 0E0000000 mask FE0000000 uncachable [ 0.000557] 5 base 11F600000 mask FFFE00000 uncachable [ 0.000558] 6 base 11F800000 mask FFF800000 uncachable [ 0.000559] 7 disabled [ 0.000560] 8 disabled [ 0.000560] 9 disabled [ 0.001141] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001404] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.007160] found SMP MP-table at [mem 0x000fceb0-0x000fcebf] [ 0.007178] check: Scanning 1 areas for low memory corruption [ 0.007179] initial memory mapped: [mem 0x00000000-0x10ffffff] [ 0.007182] reserving inaccessible SNB gfx pages [ 0.007217] RAMDISK: [mem 0x7f8fd000-0x7fffffff] [ 0.007219] Allocated new RAMDISK: [mem 0x368fb000-0x36ffd46c] [ 0.008879] Move RAMDISK from [mem 0x7f8fd000-0x7ffff46c] to [mem 0x368fb000-0x36ffd46c] [ 0.008887] ACPI: Early table checksum verification disabled [ 0.008891] ACPI: RSDP 0x00000000000F0450 000024 (v02 INTEL ) [ 0.008895] ACPI: XSDT 0x00000000DA8A6068 00004C (v01 INTEL DH67CL 01072009 AMI 00010013) [ 0.008902] ACPI: FACP 0x00000000DA8AD448 0000F4 (v04 INTEL DH67CL 01072009 AMI 00010013) [ 0.008907] ACPI: DSDT 0x00000000DA8A6140 007302 (v02 INTEL DH67CL 00000012 INTL 20051117) [ 0.008911] ACPI: FACS 0x00000000DABE1F80 000040 [ 0.008914] ACPI: APIC 0x00000000DA8AD540 000062 (v03 INTEL DH67CL 01072009 AMI 00010013) [ 0.008918] ACPI: SSDT 0x00000000DA8AD5A8 000098 (v01 INTEL DH67CL 00000001 MSFT 03000001) [ 0.008921] ACPI: MCFG 0x00000000DA8AD640 00003C (v01 INTEL DH67CL 01072009 MSFT 00000097) [ 0.008925] ACPI: HPET 0x00000000DA8AD680 000038 (v01 INTEL DH67CL 01072009 AMI. 00000004) [ 0.008928] ACPI: Reserving FACP table memory at [mem 0xda8ad448-0xda8ad53b] [ 0.008930] ACPI: Reserving DSDT table memory at [mem 0xda8a6140-0xda8ad441] [ 0.008931] ACPI: Reserving FACS table memory at [mem 0xdabe1f80-0xdabe1fbf] [ 0.008932] ACPI: Reserving APIC table memory at [mem 0xda8ad540-0xda8ad5a1] [ 0.008933] ACPI: Reserving SSDT table memory at [mem 0xda8ad5a8-0xda8ad63f] [ 0.008935] ACPI: Reserving MCFG table memory at [mem 0xda8ad640-0xda8ad67b] [ 0.008936] ACPI: Reserving HPET table memory at [mem 0xda8ad680-0xda8ad6b7] [ 0.008945] ACPI: Local APIC address 0xfee00000 [ 0.008948] 2624MB HIGHMEM available. [ 0.008949] 879MB LOWMEM available. [ 0.008950] mapped low ram: 0 - 36ffe000 [ 0.008951] low ram: 0 - 36ffe000 [ 0.008955] Zone ranges: [ 0.008956] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.008958] Normal [mem 0x0000000001000000-0x0000000036ffdfff] [ 0.008959] HighMem [mem 0x0000000036ffe000-0x00000000daffffff] [ 0.008961] Movable zone start for each node [ 0.008962] Early memory node ranges [ 0.008963] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.008964] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.008965] node 0: [mem 0x0000000020200000-0x000000003fffffff] [ 0.008966] node 0: [mem 0x0000000040200000-0x00000000da85dfff] [ 0.008968] node 0: [mem 0x00000000dae90000-0x00000000daffffff] [ 0.008969] Initmem setup node 0 [mem 0x0000000000001000-0x00000000daffffff] [ 0.008971] On node 0 totalpages: 894314 [ 0.011228] DMA zone: 40 pages used for memmap [ 0.011230] DMA zone: 0 pages reserved [ 0.011232] DMA zone: 3996 pages, LIFO batch:0 [ 0.011235] Normal zone: 2160 pages used for memmap [ 0.011236] Normal zone: 220670 pages, LIFO batch:63 [ 0.011238] HighMem zone: 669648 pages, LIFO batch:63 [ 0.024502] Using APIC driver default [ 0.024513] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff] [ 0.024749] ACPI: PM-Timer IO Port: 0x408 [ 0.024751] ACPI: Local APIC address 0xfee00000 [ 0.024757] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.024767] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.024769] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.024771] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.024773] ACPI: IRQ0 used by override. [ 0.024774] ACPI: IRQ9 used by override. [ 0.024776] Using ACPI (MADT) for SMP configuration information [ 0.024778] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.024783] TSC deadline timer available [ 0.024784] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.024802] [mem 0xdfa00000-0xfed1bfff] available for PCI devices [ 0.024805] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.024810] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.024850] percpu: Embedded 30 pages/cpu s91532 r0 d31348 u122880 [ 0.024855] pcpu-alloc: s91532 r0 d31348 u122880 alloc=30*4096 [ 0.024856] pcpu-alloc: [0] 0 [0] 1 [ 0.024869] Built 1 zonelists, mobility grouping on. Total pages: 892114 [ 0.024871] Kernel command line: BOOT_IMAGE=../kernel root=UUID=bfee7521-a39f-47cf-9316-c2b9fb024862 raid=noautodetect net.ifnames=0 consoleblank=600 initrd=../initrd.gz [ 0.024995] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.025014] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.025032] microcode: microcode updated early to revision 0x2f, date = 2019-02-17 [ 0.025037] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.025040] Initializing HighMem for node 0 (00036ffe:000db000) [ 0.129125] Initializing Movable for node 0 (00000000:00000000) [ 0.130956] Memory: 3522464K/3577256K available (6509K kernel code, 697K rwdata, 2328K rodata, 624K init, 360K bss, 54792K reserved, 0K cma-reserved, 2678592K highmem) [ 0.130959] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.131012] random: get_random_u32 called from cache_random_seq_create+0x76/0x140 with crng_init=0 [ 0.131088] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.131135] rcu: Hierarchical RCU implementation. [ 0.131136] rcu: RCU event tracing is enabled. [ 0.131137] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.131138] Tracing variant of Tasks RCU enabled. [ 0.131140] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.131141] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.131151] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16 [ 0.132412] Console: colour VGA+ 80x25 [ 0.139062] printk: console [tty0] enabled [ 0.139124] ACPI: Core revision 20200925 [ 0.139255] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.139344] APIC: Switch to symmetric I/O mode setup [ 0.139399] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.139874] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.159345] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f3d3dd077, max_idle_ns: 440795306933 ns [ 0.159423] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.40 BogoMIPS (lpj=9976804) [ 0.159500] pid_max: default: 32768 minimum: 301 [ 0.159596] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.159655] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.159958] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.160021] process: using mwait in idle threads [ 0.160080] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.160134] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.160193] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.160265] Spectre V2 : Mitigation: Full generic retpoline [ 0.160321] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.160381] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.160440] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.160502] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.160575] L1TF: Kernel not compiled for PAE. No mitigation for L1TF [ 0.160632] MDS: Mitigation: Clear CPU buffers [ 0.160855] Freeing SMP alternatives memory: 32K [ 0.163472] smpboot: CPU0: Intel(R) Celeron(R) CPU G540 @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.163634] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.163717] ... version: 3 [ 0.163770] ... bit width: 48 [ 0.163823] ... generic registers: 8 [ 0.163876] ... value mask: 0000ffffffffffff [ 0.163932] ... max period: 00007fffffffffff [ 0.163987] ... fixed-purpose events: 3 [ 0.164039] ... event mask: 00000007000000ff [ 0.164166] rcu: Hierarchical SRCU implementation. [ 0.164388] smp: Bringing up secondary CPUs ... [ 0.164503] x86: Booting SMP configuration: [ 0.164557] .... node #0, CPUs: #1 [ 0.165348] smp: Brought up 1 node, 2 CPUs [ 0.165457] smpboot: Max logical packages: 1 [ 0.165511] smpboot: Total of 2 processors activated (9976.80 BogoMIPS) [ 0.166555] devtmpfs: initialized [ 0.166888] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.167430] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.167680] NET: Registered protocol family 16 [ 0.167634] kworker/u4:0 (27) used greatest stack depth: 6872 bytes left [ 0.167925] thermal_sys: Registered thermal governor 'bang_bang' [ 0.167926] thermal_sys: Registered thermal governor 'step_wise' [ 0.167983] thermal_sys: Registered thermal governor 'user_space' [ 0.168120] cpuidle: using governor ladder [ 0.168120] ACPI: bus type PCI registered [ 0.168186] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.168186] PCI: not using MMCONFIG [ 0.179422] PCI: Using configuration type 1 for base access [ 0.179422] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.179697] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.180142] kworker/u4:1 (70) used greatest stack depth: 6868 bytes left [ 0.181260] Kprobes globally optimized [ 0.247424] raid6: sse2x2 gen() 11425 MB/s [ 0.315422] raid6: sse2x2 xor() 6140 MB/s [ 0.383423] raid6: sse2x1 gen() 9480 MB/s [ 0.451422] raid6: sse2x1 xor() 5747 MB/s [ 0.519426] raid6: sse1x2 gen() 5566 MB/s [ 0.587424] raid6: sse1x1 gen() 5130 MB/s [ 0.587478] raid6: using algorithm sse2x2 gen() 11425 MB/s [ 0.587534] raid6: .... xor() 6140 MB/s, rmw enabled [ 0.587590] raid6: using ssse3x1 recovery algorithm [ 0.587685] ACPI: Added _OSI(Module Device) [ 0.587740] ACPI: Added _OSI(Processor Device) [ 0.587794] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.587848] ACPI: Added _OSI(Processor Aggregator Device) [ 0.587904] ACPI: Added _OSI(Linux-Dell-Video) [ 0.587959] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.588015] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.592380] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.593408] ACPI: Dynamic OEM Table Load: [ 0.593466] ACPI: SSDT 0x00000000E0329800 000202 (v01 AMI IST 00000001 MSFT 03000001) [ 0.593914] ACPI: Dynamic OEM Table Load: [ 0.593970] ACPI: SSDT 0x00000000E0239900 0000A2 (v01 AMI CST 00000001 MSFT 03000001) [ 0.594866] ACPI: Interpreter enabled [ 0.594924] ACPI: (supports S0 S5) [ 0.594977] ACPI: Using IOAPIC for interrupt routing [ 0.595063] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.595199] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.595271] PCI: Using MMCONFIG for extended config space [ 0.595331] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.595643] ACPI: Enabled 8 GPEs in block 00 to 3F [ 0.595863] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.602382] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.602445] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.602670] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.602868] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.602931] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.603148] PCI host bridge to bus 0000:00 [ 0.603203] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.603261] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.603320] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.603378] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.603423] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.603482] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.603542] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xffffffff window] [ 0.603603] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.603672] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000 [ 0.603828] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000 [ 0.603893] pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit] [ 0.603956] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.604019] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.604195] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.604272] pci 0000:00:16.0: reg 0x10: [mem 0xfe725000-0xfe72500f 64bit] [ 0.604405] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.604552] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000 [ 0.604623] pci 0000:00:19.0: reg 0x10: [mem 0xfe700000-0xfe71ffff] [ 0.604687] pci 0000:00:19.0: reg 0x14: [mem 0xfe724000-0xfe724fff] [ 0.604753] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.604869] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.605014] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.605086] pci 0000:00:1a.0: reg 0x10: [mem 0xfe723000-0xfe7233ff] [ 0.605228] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.605376] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.605529] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.605687] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.605838] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.605993] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.606144] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.606303] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.606376] pci 0000:00:1d.0: reg 0x10: [mem 0xfe722000-0xfe7223ff] [ 0.606519] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.606666] pci 0000:00:1f.0: [8086:1c4a] type 00 class 0x060100 [ 0.606908] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 0.606976] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.607038] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.607101] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.607163] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.607225] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.607288] pci 0000:00:1f.2: reg 0x24: [mem 0xfe721000-0xfe7217ff] [ 0.607386] pci 0000:00:1f.2: PME# supported from D3hot [ 0.607505] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.607578] pci 0000:00:1f.3: reg 0x10: [mem 0xfe720000-0xfe7200ff 64bit] [ 0.607657] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.607875] pci 0000:01:00.0: [1283:8892] type 01 class 0x060401 [ 0.608131] pci 0000:01:00.0: supports D1 D2 [ 0.608186] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.608315] pci 0000:00:1c.0: PCI bridge to [bus 01-02] [ 0.608438] pci_bus 0000:02: extended config space not accessible [ 0.608609] pci 0000:01:00.0: PCI bridge to [bus 02] (subtractive decode) [ 0.608792] pci 0000:03:00.0: [14f1:8852] type 00 class 0x040000 [ 0.608897] pci 0000:03:00.0: reg 0x10: [mem 0xfe400000-0xfe5fffff 64bit] [ 0.609198] pci 0000:03:00.0: supports D1 D2 [ 0.609252] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot [ 0.609433] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.609520] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.609580] pci 0000:00:1c.1: bridge window [mem 0xfe400000-0xfe5fffff] [ 0.609712] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.609799] pci 0000:04:00.0: reg 0x10: [mem 0xfe600000-0xfe601fff 64bit] [ 0.610023] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.610205] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.610266] pci 0000:00:1c.3: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.610346] pci_bus 0000:00: on NUMA node 0 [ 0.611053] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.611169] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.611281] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.611392] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.611472] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.611584] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.611697] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.611810] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.612008] iommu: Default domain type: Translated [ 0.612105] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.612163] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.612238] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.612294] vgaarb: loaded [ 0.612729] PCI: Using ACPI for IRQ routing [ 0.614322] PCI: pci_cache_line_size set to 64 bytes [ 0.614373] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.614375] e820: reserve RAM buffer [mem 0xda85e000-0xdbffffff] [ 0.614376] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.614479] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.614542] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.616442] clocksource: Switched to clocksource tsc-early [ 0.616538] VFS: Disk quotas dquot_6.6.0 [ 0.616604] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.616689] pnp: PnP ACPI init [ 0.616857] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved [ 0.616917] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.616975] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.617033] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.617093] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.617159] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.617307] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.617369] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.617664] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.617716] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.617777] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.617952] system 00:04: [io 0x0400-0x0453] has been reserved [ 0.618009] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.618066] system 00:04: [io 0x1180-0x119f] has been reserved [ 0.618124] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.618182] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.618240] system 00:04: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.618300] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.618358] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 0.618420] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.618479] system 00:05: [io 0x0454-0x0457] has been reserved [ 0.618540] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.618740] pnp: PnP ACPI: found 6 devices [ 0.618796] PnPBIOS: Disabled [ 0.653898] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.654012] NET: Registered protocol family 2 [ 0.654103] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.654428] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.654492] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.654559] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.654630] TCP: Hash tables configured (established 8192 bind 8192) [ 0.654705] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.654766] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.654854] NET: Registered protocol family 1 [ 0.654925] pci 0000:01:00.0: PCI bridge to [bus 02] [ 0.655010] pci 0000:00:1c.0: PCI bridge to [bus 01-02] [ 0.655076] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.655136] pci 0000:00:1c.1: bridge window [mem 0xfe400000-0xfe5fffff] [ 0.655201] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.655260] pci 0000:00:1c.3: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.655326] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.655926] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.655984] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.656042] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.656099] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.656158] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.656217] pci_bus 0000:00: resource 10 [mem 0xdfa00000-0xffffffff window] [ 0.656277] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe5fffff] [ 0.656335] pci_bus 0000:04: resource 1 [mem 0xfe600000-0xfe6fffff] [ 0.656470] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling [ 0.656551] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.657073] PCI: CLS 64 bytes, default 64 [ 0.657162] Trying to unpack rootfs image as initramfs... [ 0.820151] Freeing initrd memory: 7180K [ 0.820300] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 0.820360] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 0.820417] RAPL PMU: hw unit of domain package 2^-16 Joules [ 0.820473] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 0.820694] check: Scanning for low memory corruption every 60 seconds [ 0.821103] Initialise system trusted keyrings [ 0.821265] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 0.822903] xor: measuring software checksum speed [ 0.823667] pIII_sse : 14087 MB/sec [ 0.824352] prefetch64-sse : 15592 MB/sec [ 0.824406] xor: using function: prefetch64-sse (15592 MB/sec) [ 0.824463] async_tx: api initialized (async) [ 0.824518] Key type asymmetric registered [ 0.824572] Asymmetric key parser 'x509' registered [ 0.824636] bounce: pool size: 64 pages [ 0.824701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.824782] io scheduler mq-deadline registered [ 0.825153] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24 [ 0.825398] pcieport 0000:00:1c.1: PME: Signaling with IRQ 25 [ 0.825567] pcieport 0000:00:1c.3: PME: Signaling with IRQ 26 [ 0.825739] vga16fb: initializing [ 0.825741] vga16fb: mapped to 0x(ptrval) [ 0.916725] Console: switching to colour frame buffer device 80x30 [ 1.108446] fb0: VGA16 VGA frame buffer device [ 1.114965] intel_idle: MWAIT substates: 0x1120 [ 1.114966] intel_idle: v0.5.1 model 0x2A [ 1.115050] intel_idle: Local APIC timer is reliable in all C-states [ 1.115143] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.121751] ACPI: Power Button [PWRB] [ 1.128044] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.134241] ACPI: Power Button [PWRF] [ 1.141013] isapnp: Scanning for PnP cards... [ 1.502262] isapnp: No Plug & Play device found [ 1.520237] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.527715] Non-volatile memory driver v1.3 [ 1.535869] brd: module loaded [ 1.542165] i8042: PNP: No PS/2 controller found. [ 1.548523] i8042: Probing ports directly. [ 1.557736] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.564191] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.570510] mousedev: PS/2 mouse device common for all mice [ 1.576901] rtc_cmos 00:02: RTC can wake from S4 [ 1.583469] rtc_cmos 00:02: registered as rtc0 [ 1.589783] rtc_cmos 00:02: setting system clock to 2023-03-26T14:35:14 UTC (1679841314) [ 1.596100] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.602304] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 1.608418] intel_pstate: Intel P-state driver initializing [ 1.614991] Initializing XFRM netlink socket [ 1.621984] NET: Registered protocol family 17 [ 1.628485] NET: Registered protocol family 15 [ 1.634476] Key type dns_resolver registered [ 1.640448] microcode: sig=0x206a7, pf=0x2, revision=0x2f [ 1.646511] microcode: Microcode Update Driver: v2.2. [ 1.646516] IPI shorthand broadcast: enabled [ 1.657698] sched_clock: Marking stable (1649613188, 8076607)->(1892429111, -234739316) [ 1.663636] registered taskstats version 1 [ 1.669847] Loading compiled-in X.509 certificates [ 1.831465] tsc: Refined TSC clocksource calibration: 2494.337 MHz [ 1.837945] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f4544ecb4, max_idle_ns: 440795257849 ns [ 1.851196] clocksource: Switched to clocksource tsc [ 4.711507] floppy0: no floppy controllers found [ 4.718529] Freeing unused kernel image (initmem) memory: 624K [ 4.739509] Write protecting kernel text and read-only data: 8840k [ 4.746545] Run /init as init process [ 4.753639] with arguments: [ 4.753640] /init [ 4.753641] with environment: [ 4.753642] HOME=/ [ 4.753643] TERM=linux [ 4.753644] BOOT_IMAGE=../kernel [ 4.761333] init (1173) used greatest stack depth: 6820 bytes left [ 4.802473] dracut: eisfair-2.8.25 [ 4.846942] systemd-udevd[1271]: starting version 3.2.10 [ 4.854634] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 4.862298] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 4.871027] udevd[1272]: starting eudev-3.2.10 [ 4.878772] udevadm (1273) used greatest stack depth: 6312 bytes left [ 4.893468] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 4.937410] ACPI: bus type USB registered [ 4.944921] usbcore: registered new interface driver usbfs [ 4.952561] usbcore: registered new interface driver hub [ 4.963952] SCSI subsystem initialized [ 4.964000] usbcore: registered new device driver usb [ 4.987751] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.995727] ehci-pci: EHCI PCI platform driver [ 5.003332] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.010844] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.018434] ehci-pci 0000:00:1a.0: debug port 2 [ 5.029751] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 5.037286] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe723000 [ 5.044981] libata version 3.00 loaded. [ 5.045885] ahci 0000:00:1f.2: version 3.0 [ 5.056152] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x37 impl SATA mode [ 5.064650] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst [ 5.067458] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.080898] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 5.088880] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.096636] usb usb1: Product: EHCI Host Controller [ 5.104219] usb usb1: Manufacturer: Linux 5.10.70-eisfair-1-SMP ehci_hcd [ 5.111866] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.119541] hub 1-0:1.0: USB hub found [ 5.120753] scsi host0: ahci [ 5.127257] hub 1-0:1.0: 2 ports detected [ 5.135083] scsi host1: ahci [ 5.142192] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.149385] scsi host2: ahci [ 5.155681] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.155702] ehci-pci 0000:00:1d.0: debug port 2 [ 5.162958] scsi host3: ahci [ 5.173855] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 5.179089] scsi host4: ahci [ 5.186204] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe722000 [ 5.194358] scsi host5: ahci [ 5.215440] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.218337] ata1: SATA max UDMA/133 abar m2048@0xfe721000 port 0xfe721100 irq 27 [ 5.226673] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 5.234799] ata2: SATA max UDMA/133 abar m2048@0xfe721000 port 0xfe721180 irq 27 [ 5.234801] ata3: SATA max UDMA/133 abar m2048@0xfe721000 port 0xfe721200 irq 27 [ 5.243143] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.251152] ata4: DUMMY [ 5.251154] ata5: SATA max UDMA/133 abar m2048@0xfe721000 port 0xfe721300 irq 27 [ 5.259046] usb usb2: Product: EHCI Host Controller [ 5.266687] ata6: SATA max UDMA/133 abar m2048@0xfe721000 port 0xfe721380 irq 27 [ 5.274304] usb usb2: Manufacturer: Linux 5.10.70-eisfair-1-SMP ehci_hcd [ 5.307400] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.316128] hub 2-0:1.0: USB hub found [ 5.324647] hub 2-0:1.0: 2 ports detected [ 5.333642] uhci_hcd: USB Universal Host Controller Interface driver [ 5.343185] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.352626] ohci-pci: OHCI PCI platform driver [ 5.363046] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 5.371948] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 5.381014] xhci_hcd 0000:04:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004 [ 5.399072] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 5.407689] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 [ 5.416077] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 5.424294] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 5.432169] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.439895] usb usb3: Product: xHCI Host Controller [ 5.443437] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.447462] usb usb3: Manufacturer: Linux 5.10.70-eisfair-1-SMP xhci-hcd [ 5.447463] usb usb3: SerialNumber: 0000:04:00.0 [ 5.447588] hub 3-0:1.0: USB hub found [ 5.477201] hub 3-0:1.0: 2 ports detected [ 5.484319] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.491591] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 5.498700] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.505646] usb usb4: Product: xHCI Host Controller [ 5.512591] usb usb4: Manufacturer: Linux 5.10.70-eisfair-1-SMP xhci-hcd [ 5.519625] usb usb4: SerialNumber: 0000:04:00.0 [ 5.526861] hub 4-0:1.0: USB hub found [ 5.533934] hub 4-0:1.0: 2 ports detected [ 5.597971] ata6: SATA link down (SStatus 0 SControl 300) [ 5.605500] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.613070] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.613080] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.627852] ata5: SATA link down (SStatus 0 SControl 300) [ 5.634686] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.634704] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.641520] ata3.00: ATA-8: WDC WD5000AACS-00G8B1, 05.04C05, max UDMA/133 [ 5.648069] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.661821] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.668930] ata1.00: ATA-9: SanDisk SDSSDRC032G, 2.0.0, max UDMA/133 [ 5.675982] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 32) [ 5.683058] hub 1-1:1.0: USB hub found [ 5.683246] ata2.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OAA10, max UDMA/133 [ 5.697107] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.697108] hub 1-1:1.0: 6 ports detected [ 5.711906] ata1.00: configured for UDMA/133 [ 5.719116] ata3.00: configured for UDMA/133 [ 5.723524] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDRC0 0 PQ: 0 ANSI: 5 [ 5.725841] ata2.00: configured for UDMA/133 [ 5.739681] scsi 1:0:0:0: Direct-Access ATA Hitachi HDS5C302 AA10 PQ: 0 ANSI: 5 [ 5.747886] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AACS-0 4C05 PQ: 0 ANSI: 5 [ 5.759140] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 5.760475] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 5.766475] sd 0:0:0:0: [sda] Write Protect is off [ 5.773954] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 5.781538] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.789465] sd 2:0:0:0: [sdc] Write Protect is off [ 5.789636] sd 1:0:0:0: [sdb] Write Protect is off [ 5.797560] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.797582] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.805498] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.821668] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.821670] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.838824] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.866663] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.876964] hub 2-1:1.0: USB hub found [ 5.886880] sda: sda1 sda2 [ 5.889705] hub 2-1:1.0: 8 ports detected [ 5.896165] sdb: sdb1 [ 5.905334] sdc: sdc1 [ 5.914880] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.923920] sd 1:0:0:0: [sdb] Attached SCSI disk [ 5.933039] sd 2:0:0:0: [sdc] Attached SCSI disk [ 5.977428] random: fast init done [ 6.123462] usb 1-1.4: new high-speed USB device number 3 using ehci-pci [ 6.231457] usb 2-1.4: new high-speed USB device number 3 using ehci-pci [ 6.241074] usb 1-1.4: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 [ 6.249824] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.258598] hub 1-1.4:1.0: USB hub found [ 6.267441] hub 1-1.4:1.0: 4 ports detected [ 6.268662] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro,data=ordered [ 6.292662] mount (2413) used greatest stack depth: 6172 bytes left [ 6.330731] dracut: Checking ext4: /dev/disk/by-uuid/bfee7521-a39f-47cf-9316-c2b9fb024862 [ 6.339722] dracut: issuing e2fsck -a /dev/disk/by-uuid/bfee7521-a39f-47cf-9316-c2b9fb024862 [ 6.355501] dracut: /dev/disk/by-uuid/bfee7521-a39f-47cf-9316-c2b9fb024862: clean, 1276312/1954064 files, 6684378/7801565 blocks [ 6.371935] usb 2-1.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 6.373398] dracut: Mounting /dev/disk/by-uuid/bfee7521-a39f-47cf-9316-c2b9fb024862 with -o rw,noatime,nodiratime,errors=remount-ro,data=ordered [ 6.379345] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6.379347] usb 2-1.4: Product: USB 2.0 Hub [ 6.379592] hub 2-1.4:1.0: USB hub found [ 6.406220] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro,data=ordered [ 6.409446] hub 2-1.4:1.0: 4 ports detected [ 6.435653] dracut: Mounted root filesystem /dev/sda2 [ 6.468011] systemd-udevd (1397) used greatest stack depth: 5700 bytes left [ 6.477201] systemd-udevd (1393) used greatest stack depth: 5668 bytes left [ 6.512833] dracut: Switching root [ 6.631455] usb 1-1.4.4: new full-speed USB device number 4 using ehci-pci [ 6.696277] systemd[1]: Inserted module 'autofs4' [ 6.716079] NET: Registered protocol family 10 [ 6.752656] usb 1-1.4.4: New USB device found, idVendor=0557, idProduct=8021, bcdDevice= 1.00 [ 6.768770] usb 1-1.4.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.777597] hub 1-1.4.4:1.0: USB hub found [ 6.786056] hub 1-1.4.4:1.0: 4 ports detected [ 6.810914] Segment Routing with IPv6 [ 6.819479] RPL Segment Routing with IPv6 [ 6.827450] usb 2-1.4.4: new high-speed USB device number 4 using ehci-pci [ 6.875874] systemd[1]: systemd 251.2 running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 6.915291] systemd[1]: Detected architecture x86. [ 6.951461] systemd[1]: Hostname set to . [ 6.999677] systemd-sysv-generator[2547]: SysV service '/etc/init.d/lcd4linux' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.030703] systemd-sysv-generator[2547]: SysV service '/etc/init.d/bonding' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.061777] systemd-sysv-generator[2547]: SysV service '/etc/init.d/ntp' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.093839] systemd-fstab-generator[2539]: Mount point iso9660 is not a valid path, ignoring. [ 7.095510] systemd-sysv-generator[2547]: SysV service '/etc/init.d/nico' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.111786] systemd-fstab-generator[2539]: Mount point auto is not a valid path, ignoring. [ 7.151914] usb 1-1.4.4.1: new full-speed USB device number 5 using ehci-pci [ 7.161539] systemd-fstab-generator[2539]: Mount point auto is not a valid path, ignoring. [ 7.181666] systemd-fstab-generator[2539]: Mount point auto is not a valid path, ignoring. [ 7.181719] systemd-sysv-generator[2547]: SysV service '/etc/init.d/deviceagent' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.191619] systemd-fstab-generator[2539]: Mount point auto is not a valid path, ignoring. [ 7.231159] systemd-sysv-generator[2547]: SysV service '/etc/init.d/autohalt' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.280896] systemd-sysv-generator[2547]: SysV service '/etc/init.d/epgd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.320748] systemd-sysv-generator[2547]: SysV service '/etc/init.d/lprng' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.358834] systemd-sysv-generator[2547]: SysV service '/etc/init.d/anacron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.398098] systemd-sysv-generator[2547]: SysV service '/etc/init.d/logsave' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.437479] systemd-sysv-generator[2547]: SysV service '/etc/init.d/smartmon' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.478652] systemd-sysv-generator[2547]: SysV service '/etc/init.d/ip-eth' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.520876] systemd-sysv-generator[2547]: SysV service '/etc/init.d/wakeup' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.564150] systemd-sysv-generator[2547]: SysV service '/etc/init.d/xinetd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.609201] systemd-sysv-generator[2547]: SysV service '/etc/init.d/ssh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.653332] systemd-sysv-generator[2547]: SysV service '/etc/init.d/smbfs' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.696342] systemd-sysv-generator[2547]: SysV service '/etc/init.d/rc' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.739016] systemd-sysv-generator[2547]: SysV service '/etc/init.d/resolv' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.781277] systemd-sysv-generator[2547]: SysV service '/etc/init.d/single' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.823675] usb 1-1.4.4.1: New USB device found, idVendor=046a, idProduct=c092, bcdDevice= 1.00 [ 7.828647] systemd-sysv-generator[2547]: SysV service '/etc/init.d/fuse' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.845267] usb 1-1.4.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.890510] systemd-sysv-generator[2547]: SysV service '/etc/init.d/vdr' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.902195] usb 1-1.4.4.1: Product: CHERRY Wireless Device [ 7.947034] systemd-sysv-generator[2547]: SysV service '/etc/init.d/hddtemp' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 7.958234] usb 1-1.4.4.1: Manufacturer: Cherry GmbH [ 7.963917] usb 2-1.4.4: New USB device found, idVendor=0bda, idProduct=0151, bcdDevice=51.95 [ 8.000541] systemd-sysv-generator[2547]: SysV service '/etc/init.d/lm_sensors' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 8.010849] usb 2-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.010851] usb 2-1.4.4: Product: USB2.0-CRW [ 8.032463] systemd-sysv-generator[2547]: SysV service '/etc/init.d/rpcbind' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 8.074922] usb 2-1.4.4: Manufacturer: Generic [ 8.074923] usb 2-1.4.4: SerialNumber: 20060413092100000 [ 8.156062] systemd-sysv-generator[2547]: SysV service '/etc/init.d/netdate' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 8.194823] systemd-sysv-generator[2547]: SysV service '/etc/init.d/samba' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 8.235157] systemd-sysv-generator[2547]: SysV service '/etc/init.d/apache2' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 8.276150] systemd-sysv-generator[2547]: SysV service '/etc/init.d/phoneled' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 8.317925] systemd-sysv-generator[2547]: SysV service '/etc/init.d/route' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 8.360226] systemd-sysv-generator[2547]: SysV service '/etc/init.d/lprng.boot' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 8.403949] systemd-sysv-generator[2547]: SysV service '/etc/init.d/mariadb102' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 8.449354] systemd-sysv-generator[2547]: SysV service '/etc/init.d/halt' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 8.494778] systemd-sysv-generator[2547]: SysV service '/etc/init.d/reboot' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 8.540472] systemd-sysv-generator[2547]: SysV service '/etc/init.d/mdadm' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 8.586306] systemd-sysv-generator[2547]: SysV service '/etc/init.d/mountfs' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 8.632188] systemd-sysv-generator[2547]: SysV service '/etc/init.d/lo' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 8.677813] systemd-sysv-generator[2547]: SysV service '/etc/init.d/rsync' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 8.723882] systemd-sysv-generator[2547]: SysV service '/etc/init.d/nscd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 8.770340] systemd-sysv-generator[2547]: SysV service '/etc/init.d/usb' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 8.816333] systemd-sysv-generator[2547]: SysV service '/etc/init.d/iperf' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 9.059030] systemd[1]: Queued start job for default target Multi-User System. [ 9.071601] systemd[1]: Created slice Slice /system/getty. [ 9.095310] systemd[1]: Created slice Slice /system/modprobe. [ 9.117822] systemd[1]: Created slice Slice /system/systemd-fsck. [ 9.139944] systemd[1]: Created slice User and Session Slice. [ 9.160779] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 9.181933] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 9.212240] systemd[1]: Reached target Local Encrypted Volumes. [ 9.232052] systemd[1]: Reached target Local Integrity Protected Volumes. [ 9.251074] systemd[1]: Reached target Network is Online. [ 9.269394] systemd[1]: Reached target Path Units. [ 9.286476] systemd[1]: Reached target Slice Units. [ 9.302723] systemd[1]: Reached target Swaps. [ 9.317771] systemd[1]: Reached target Local Verity Protected Volumes. [ 9.333079] systemd[1]: Listening on Syslog Socket. [ 9.348162] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 9.363445] systemd[1]: Listening on Journal Socket (/dev/log). [ 9.378463] systemd[1]: Listening on Journal Socket. [ 9.392884] systemd[1]: Listening on udev Control Socket. [ 9.406289] systemd[1]: Listening on udev Kernel Socket. [ 9.419600] systemd[1]: Huge Pages File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 9.433611] systemd[1]: Mounting POSIX Message Queue File System... [ 9.448242] systemd[1]: Mounting Kernel Debug File System... [ 9.462327] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [ 9.478738] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm. [ 9.499010] systemd[1]: Starting Create List of Static Device Nodes... [ 9.515507] systemd[1]: Starting Load Kernel Module configfs... [ 9.531766] systemd[1]: Starting Load Kernel Module drm... [ 9.552819] systemd[1]: Starting Load Kernel Module fuse... [ 9.569545] fuse: init (API version 7.32) [ 9.578828] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [ 9.594927] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 9.611701] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 9.629725] systemd[1]: Starting Journal Service... [ 9.653605] systemd[1]: Load Kernel Modules was skipped because all trigger condition checks failed. [ 9.672683] systemd[1]: Starting Remount Root and Kernel File Systems... [ 9.691790] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 9.724609] systemd[1]: Starting Apply Kernel Variables... [ 9.751136] systemd[1]: Starting Coldplug All udev Devices... [ 9.770947] systemd[1]: Started Journal Service. [ 9.950002] systemd-journald[2577]: Received client request to flush runtime journal. [ 10.847304] random: crng init done [ 12.423756] pps_core: LinuxPPS API ver. 1 registered [ 12.429938] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 12.462258] hid: raw HID events driver (C) Jiri Kosina [ 12.491267] PTP clock support registered [ 12.539061] usb-storage 2-1.4.4:1.0: USB Mass Storage device detected [ 12.571755] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 12.593405] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 12.600000] i2c i2c-0: 2/4 memory slots populated (from DMI) [ 12.606272] e1000e: Intel(R) PRO/1000 Network Driver [ 12.606273] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 12.606457] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 12.629795] scsi host6: usb-storage 2-1.4.4:1.0 [ 12.655207] usbcore: registered new interface driver usb-storage [ 12.683282] usbcore: registered new interface driver usbhid [ 12.690684] usbhid: USB HID core driver [ 12.719549] Error: Driver 'pcspkr' is already registered, aborting... [ 12.727887] mc: Linux media interface: v0.10 [ 12.737225] usbcore: registered new interface driver usbkbd [ 12.739547] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 12.741976] videodev: Linux video capture interface: v2.00 [ 12.742133] usbcore: registered new interface driver uas [ 12.742673] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 12.752455] usbcore: registered new interface driver usbmouse [ 12.849404] checking generic (a0000 10000) vs hw (fe000000 400000) [ 12.849407] checking generic (a0000 10000) vs hw (e0000000 10000000) [ 12.849409] fb0: switching to inteldrmfb from VGA16 VGA [ 12.895314] cx23885: cx23885 driver version 0.0.4 loaded [ 12.895456] cx23885: CORE cx23885[0]: subsystem: 4254:0982, board: DVBSky T982 [card=51,autodetected] [ 12.908700] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 12.960835] Console: switching to colour VGA+ 80x25 [ 12.961689] i915 0000:00:02.0: vgaarb: deactivate vga console [ 12.972121] Console: switching to colour dummy device 80x25 [ 12.995372] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 13.015793] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0 [ 13.045145] fbcon: i915drmfb (fb0) is primary device [ 13.135851] Console: switching to colour frame buffer device 240x67 [ 13.142136] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 38:60:77:1a:7b:f2 [ 13.142138] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 13.142187] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 13.158984] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 13.294796] iTCO_vendor_support: vendor-support=0 [ 13.296925] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 13.296992] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 13.301005] input: Cherry GmbH CHERRY Wireless Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4.1/1-1.4.4.1:1.0/0003:046A:C092.0001/input/input6 [ 13.301960] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 13.315702] at24 0-0051: supply vcc not found, using dummy regulator [ 13.317360] at24 0-0051: 256 byte spd EEPROM, read-only [ 13.317415] at24 0-0053: supply vcc not found, using dummy regulator [ 13.320738] at24 0-0053: 256 byte spd EEPROM, read-only [ 13.358426] cx25840 11-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0]) [ 13.370668] hid-generic 0003:046A:C092.0001: input,hidraw0: USB HID v1.11 Keyboard [Cherry GmbH CHERRY Wireless Device] on usb-0000:00:1a.0-1.4.4.1/input0 [ 13.371054] input: Cherry GmbH CHERRY Wireless Device Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4.1/1-1.4.4.1:1.1/0003:046A:C092.0002/input/input7 [ 13.371237] input: Cherry GmbH CHERRY Wireless Device Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4.1/1-1.4.4.1:1.1/0003:046A:C092.0002/input/input8 [ 13.409473] cx25840 11-0044: Direct firmware load for v4l-cx23885-avcore-01.fw failed with error -2 [ 13.409525] cx25840 11-0044: unable to open firmware v4l-cx23885-avcore-01.fw [ 13.423647] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 13.423679] cx23885: cx23885[0]: cx23885 based dvb card [ 13.427617] input: Cherry GmbH CHERRY Wireless Device System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4.1/1-1.4.4.1:1.1/0003:046A:C092.0002/input/input9 [ 13.427810] input: Cherry GmbH CHERRY Wireless Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4.1/1-1.4.4.1:1.1/0003:046A:C092.0002/input/input10 [ 13.428451] hid-generic 0003:046A:C092.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Cherry GmbH CHERRY Wireless Device] on usb-0000:00:1a.0-1.4.4.1/input1 [ 13.428664] input: Cherry GmbH CHERRY Wireless Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4.1/1-1.4.4.1:1.2/0003:046A:C092.0003/input/input11 [ 13.429635] hid-generic 0003:046A:C092.0003: input,hidraw2: USB HID v1.10 Mouse [Cherry GmbH CHERRY Wireless Device] on usb-0000:00:1a.0-1.4.4.1/input2 [ 13.494555] i2c i2c-10: Added multiplexed i2c bus 12 [ 13.494586] si2168 10-0064: Silicon Labs Si2168-A30 successfully identified [ 13.494617] si2168 10-0064: firmware version: A 3.0.2 [ 13.534518] si2157 12-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 13.534542] dvbdev: DVB: registering new adapter (cx23885[0]) [ 13.534545] cx23885 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... [ 13.537251] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 13.537258] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff) [ 13.564797] cx23885: DVBSky T982 port 1 MAC address: 00:17:42:54:09:87 [ 13.564800] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 13.564802] cx23885: cx23885[0]: cx23885 based dvb card [ 13.573226] i2c i2c-9: Added multiplexed i2c bus 13 [ 13.573228] si2168 9-0064: Silicon Labs Si2168-A30 successfully identified [ 13.573230] si2168 9-0064: firmware version: A 3.0.2 [ 13.581398] si2157 13-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 13.581411] dvbdev: DVB: registering new adapter (cx23885[0]) [ 13.581414] cx23885 0000:03:00.0: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)... [ 13.610506] cx23885: DVBSky T982 port 2 MAC address: 00:17:42:54:09:88 [ 13.618260] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa5 [ 13.618267] cx23885: cx23885[0]/0: found at 0000:03:00.0, rev: 4, irq: 17, latency: 0, mmio: 0xfe400000 [ 13.677893] scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 13.688150] scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 13.695763] EXT4-fs (sdc1): warning: checktime reached, running e2fsck is recommended [ 13.698287] scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 13.703391] EXT4-fs (sdb1): warning: checktime reached, running e2fsck is recommended [ 13.704630] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS [ 13.712055] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 13.728648] sd 6:0:0:0: [sdd] Attached SCSI removable disk [ 13.731140] sd 6:0:0:3: [sdg] Attached SCSI removable disk [ 13.735889] sd 6:0:0:2: [sdf] Attached SCSI removable disk [ 13.737634] sd 6:0:0:1: [sde] Attached SCSI removable disk [ 13.766479] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 17.856467] systemd-udevd (3679) used greatest stack depth: 5460 bytes left