[    0.000000] Linux version 5.15.102-eisfair-1-SMP (root@basebox32) (gcc (eisfair Linux) 10.3.0, GNU ld (GNU Binutils; eisfair-1) 2.36.1.20210326-3) #1 SMP Mon Mar 13 23:09:33 CET 2023
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1504
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da85dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da85e000-0x00000000da8a5fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000da8a6000-0x00000000da8adfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000da8ae000-0x00000000dabdcfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dabdd000-0x00000000dabe9fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dabea000-0x00000000dac11fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dac12000-0x00000000dac54fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dac55000-0x00000000dae8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dae90000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI:  /DH67CL, BIOS BLH6710H.86A.0163.2018.1023.1559 10/23/2018
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2494.541 MHz processor
[    0.000527] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000531] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000543] last_pfn = 0xdb000 max_arch_pfn = 0x100000
[    0.000921] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001529] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[    0.007308] found SMP MP-table at [mem 0x000fceb0-0x000fcebf]
[    0.007319] initial memory mapped: [mem 0x00000000-0x067fffff]
[    0.007355] RAMDISK: [mem 0x7f42e000-0x7fffffff]
[    0.007357] Allocated new RAMDISK: [mem 0x3642c000-0x36ffd33d]
[    0.010265] Move RAMDISK from [mem 0x7f42e000-0x7ffff33d] to [mem 0x3642c000-0x36ffd33d]
[    0.010277] ACPI: Early table checksum verification disabled
[    0.010280] ACPI: RSDP 0x00000000000F0450 000024 (v02 INTEL )
[    0.010285] ACPI: XSDT 0x00000000DA8A6068 00004C (v01 INTEL  DH67CL   01072009 AMI  00010013)
[    0.010292] ACPI: FACP 0x00000000DA8AD448 0000F4 (v04 INTEL  DH67CL   01072009 AMI  00010013)
[    0.010298] ACPI: DSDT 0x00000000DA8A6140 007302 (v02 INTEL  DH67CL   00000012 INTL 20051117)
[    0.010302] ACPI: FACS 0x00000000DABE1F80 000040
[    0.010305] ACPI: APIC 0x00000000DA8AD540 000062 (v03 INTEL  DH67CL   01072009 AMI  00010013)
[    0.010309] ACPI: SSDT 0x00000000DA8AD5A8 000098 (v01 INTEL  DH67CL   00000001 MSFT 03000001)
[    0.010312] ACPI: MCFG 0x00000000DA8AD640 00003C (v01 INTEL  DH67CL   01072009 MSFT 00000097)
[    0.010316] ACPI: HPET 0x00000000DA8AD680 000038 (v01 INTEL  DH67CL   01072009 AMI. 00000004)
[    0.010319] ACPI: Reserving FACP table memory at [mem 0xda8ad448-0xda8ad53b]
[    0.010321] ACPI: Reserving DSDT table memory at [mem 0xda8a6140-0xda8ad441]
[    0.010323] ACPI: Reserving FACS table memory at [mem 0xdabe1f80-0xdabe1fbf]
[    0.010324] ACPI: Reserving APIC table memory at [mem 0xda8ad540-0xda8ad5a1]
[    0.010326] ACPI: Reserving SSDT table memory at [mem 0xda8ad5a8-0xda8ad63f]
[    0.010327] ACPI: Reserving MCFG table memory at [mem 0xda8ad640-0xda8ad67b]
[    0.010328] ACPI: Reserving HPET table memory at [mem 0xda8ad680-0xda8ad6b7]
[    0.010340] 2624MB HIGHMEM available.
[    0.010342] 879MB LOWMEM available.
[    0.010343]   mapped low ram: 0 - 36ffe000
[    0.010344]   low ram: 0 - 36ffe000
[    0.010347] Zone ranges:
[    0.010348]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.010351]   Normal   [mem 0x0000000001000000-0x0000000036ffdfff]
[    0.010353]   HighMem  [mem 0x0000000036ffe000-0x00000000daffffff]
[    0.010355] Movable zone start for each node
[    0.010356] Early memory node ranges
[    0.010356]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.010358]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.010360]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.010361]   node   0: [mem 0x0000000040200000-0x00000000da85dfff]
[    0.010363]   node   0: [mem 0x00000000dae90000-0x00000000daffffff]
[    0.010364] Initmem setup node 0 [mem 0x0000000000001000-0x00000000daffffff]
[    0.010374] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.010438] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.013870] On node 0, zone Normal: 512 pages in unavailable ranges
[    0.024178] On node 0, zone HighMem: 512 pages in unavailable ranges
[    0.024216] On node 0, zone HighMem: 1586 pages in unavailable ranges
[    0.024218] Using APIC driver default
[    0.024226] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff]
[    0.024465] ACPI: PM-Timer IO Port: 0x408
[    0.024472] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.024483] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.024486] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.024488] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.024492] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.024494] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.024499] TSC deadline timer available
[    0.024501] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.024519] [mem 0xdfa00000-0xfed1bfff] available for PCI devices
[    0.024522] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.024528] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.024563] percpu: Embedded 26 pages/cpu s77708 r0 d28788 u106496
[    0.024568] pcpu-alloc: s77708 r0 d28788 u106496 alloc=26*4096
[    0.024571] pcpu-alloc: [0] 0 [0] 1 
[    0.024584] Built 1 zonelists, mobility grouping on.  Total pages: 892114
[    0.024587] Kernel command line: BOOT_IMAGE=../kernel root=UUID=bfee7521-a39f-47cf-9316-c2b9fb024862 raid=noautodetect net.ifnames=0 consoleblank=600 initrd=../initrd.gz
[    0.024683] Unknown kernel command line parameters "BOOT_IMAGE=../kernel", will be passed to user space.
[    0.024720] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.024742] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.024762] microcode: microcode updated early to revision 0x2f, date = 2019-02-17
[    0.024767] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.024770] Initializing HighMem for node 0 (00036ffe:000db000)
[    0.125024] Initializing Movable for node 0 (00000000:00000000)
[    0.126844] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.126854] Memory: 3517364K/3577256K available (6788K kernel code, 709K rwdata, 2420K rodata, 616K init, 360K bss, 59892K reserved, 0K cma-reserved, 2678592K highmem)
[    0.127134] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.127201] rcu: Hierarchical RCU implementation.
[    0.127202] rcu: 	RCU event tracing is enabled.
[    0.127203] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.127204] 	Tracing variant of Tasks RCU enabled.
[    0.127205] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.127206] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.127216] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16
[    0.128465] Console: colour VGA+ 80x25
[    0.135397] printk: console [tty0] enabled
[    0.135460] ACPI: Core revision 20210730
[    0.135588] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.135677] APIC: Switch to symmetric I/O mode setup
[    0.135733] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.136206] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.155675] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f51528916, max_idle_ns: 440795324197 ns
[    0.155754] Calibrating delay loop (skipped), value calculated using timer frequency.. 4989.08 BogoMIPS (lpj=9978164)
[    0.155832] pid_max: default: 32768 minimum: 301
[    0.155985] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.156046] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.156419] CPU0: Thermal monitoring enabled (TM1)
[    0.156490] process: using mwait in idle threads
[    0.156552] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.156608] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.156669] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.156742] Spectre V2 : Mitigation: Retpolines
[    0.156796] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.156857] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.156913] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.156972] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.157032] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.157105] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
[    0.157163] MDS: Mitigation: Clear CPU buffers
[    0.157217] MMIO Stale Data: Unknown: No mitigations
[    0.157624] Freeing SMP alternatives memory: 32K
[    0.159824] smpboot: CPU0: Intel(R) Celeron(R) CPU G540 @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.160032] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.160116] ... version:                3
[    0.160169] ... bit width:              48
[    0.160222] ... generic registers:      8
[    0.160275] ... value mask:             0000ffffffffffff
[    0.160331] ... max period:             00007fffffffffff
[    0.160386] ... fixed-purpose events:   3
[    0.160439] ... event mask:             00000007000000ff
[    0.160568] rcu: Hierarchical SRCU implementation.
[    0.160814] smp: Bringing up secondary CPUs ...
[    0.160950] x86: Booting SMP configuration:
[    0.161536] .... node  #0, CPUs:      #1
[    0.162323] smp: Brought up 1 node, 2 CPUs
[    0.162436] smpboot: Max logical packages: 1
[    0.162489] smpboot: Total of 2 processors activated (9978.16 BogoMIPS)
[    0.163602] devtmpfs: initialized
[    0.163859] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.163937] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.164288] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.164540] thermal_sys: Registered thermal governor 'bang_bang'
[    0.164541] thermal_sys: Registered thermal governor 'step_wise'
[    0.164598] thermal_sys: Registered thermal governor 'user_space'
[    0.164688] cpuidle: using governor ladder
[    0.164851] ACPI: bus type PCI registered
[    0.164952] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.165030] PCI: not using MMCONFIG
[    0.176009] PCI: Using configuration type 1 for base access
[    0.176108] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.176225] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.177253] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.177435] cryptomgr_test (28) used greatest stack depth: 7604 bytes left
[    0.241314] raid6: sse2x2   gen() 11459 MB/s
[    0.309318] raid6: sse2x2   xor()  6166 MB/s
[    0.377323] raid6: sse2x1   gen()  9052 MB/s
[    0.445326] raid6: sse2x1   xor()  5674 MB/s
[    0.513332] raid6: sse1x2   gen()  5536 MB/s
[    0.581335] raid6: sse1x1   gen()  4740 MB/s
[    0.581389] raid6: using algorithm sse2x2 gen() 11459 MB/s
[    0.581445] raid6: .... xor() 6166 MB/s, rmw enabled
[    0.581500] raid6: using ssse3x1 recovery algorithm
[    0.581600] ACPI: Added _OSI(Module Device)
[    0.581655] ACPI: Added _OSI(Processor Device)
[    0.581710] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.581765] ACPI: Added _OSI(Processor Aggregator Device)
[    0.581821] ACPI: Added _OSI(Linux-Dell-Video)
[    0.581876] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.581932] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.585651] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.588740] ACPI: Dynamic OEM Table Load:
[    0.588740] ACPI: SSDT 0x00000000C1401000 000202 (v01 AMI    IST      00000001 MSFT 03000001)
[    0.588740] ACPI: Dynamic OEM Table Load:
[    0.588740] ACPI: SSDT 0x00000000E0357A80 0000A2 (v01 AMI    CST      00000001 MSFT 03000001)
[    0.588740] ACPI: Interpreter enabled
[    0.588740] ACPI: PM: (supports S0 S5)
[    0.588741] ACPI: Using IOAPIC for interrupt routing
[    0.588741] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.588741] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.588741] PCI: Using MMCONFIG for extended config space
[    0.588741] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.588741] ACPI: Enabled 8 GPEs in block 00 to 3F
[    0.588741] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.594029] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.594093] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.594293] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.594466] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.594529] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.594738] PCI host bridge to bus 0000:00
[    0.594793] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.594853] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.594912] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.594970] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.595028] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.595089] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.595149] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xffffffff window]
[    0.595209] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.595302] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.595498] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[    0.595563] pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit]
[    0.595627] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.595688] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.595757] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.595929] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.596006] pci 0000:00:16.0: reg 0x10: [mem 0xfe725000-0xfe72500f 64bit]
[    0.596138] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.596322] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[    0.596393] pci 0000:00:19.0: reg 0x10: [mem 0xfe700000-0xfe71ffff]
[    0.596457] pci 0000:00:19.0: reg 0x14: [mem 0xfe724000-0xfe724fff]
[    0.596522] pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
[    0.596638] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.596808] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.596881] pci 0000:00:1a.0: reg 0x10: [mem 0xfe723000-0xfe7233ff]
[    0.597024] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.597198] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.597349] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.597529] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.597679] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.597858] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.598007] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.598188] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.598260] pci 0000:00:1d.0: reg 0x10: [mem 0xfe722000-0xfe7223ff]
[    0.598403] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.598570] pci 0000:00:1f.0: [8086:1c4a] type 00 class 0x060100
[    0.598839] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.598908] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[    0.598971] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[    0.599034] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[    0.599097] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[    0.599159] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.599222] pci 0000:00:1f.2: reg 0x24: [mem 0xfe721000-0xfe7217ff]
[    0.599320] pci 0000:00:1f.2: PME# supported from D3hot
[    0.599480] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.599553] pci 0000:00:1f.3: reg 0x10: [mem 0xfe720000-0xfe7200ff 64bit]
[    0.599631] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.599828] pci 0000:01:00.0: [1283:8892] type 01 class 0x060401
[    0.600083] pci 0000:01:00.0: supports D1 D2
[    0.600138] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.600273] pci 0000:00:1c.0: PCI bridge to [bus 01-02]
[    0.600400] pci_bus 0000:02: extended config space not accessible
[    0.600570] pci 0000:01:00.0: PCI bridge to [bus 02] (subtractive decode)
[    0.600749] pci 0000:03:00.0: [14f1:8852] type 00 class 0x040000
[    0.600854] pci 0000:03:00.0: reg 0x10: [mem 0xfe400000-0xfe5fffff 64bit]
[    0.601151] pci 0000:03:00.0: supports D1 D2
[    0.601205] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[    0.601387] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.601475] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.601535] pci 0000:00:1c.1:   bridge window [mem 0xfe400000-0xfe5fffff]
[    0.601667] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[    0.601755] pci 0000:04:00.0: reg 0x10: [mem 0xfe600000-0xfe601fff 64bit]
[    0.601976] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.602159] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.602220] pci 0000:00:1c.3:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.602302] pci_bus 0000:00: on NUMA node 0
[    0.602943] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.603043] ACPI: PCI: Interrupt link LNKB configured for IRQ 5
[    0.603140] ACPI: PCI: Interrupt link LNKC configured for IRQ 4
[    0.603237] ACPI: PCI: Interrupt link LNKD configured for IRQ 3
[    0.603335] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.603432] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.603530] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.603627] ACPI: PCI: Interrupt link LNKH configured for IRQ 7
[    0.603802] iommu: Default domain type: Translated 
[    0.603859] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.606397] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.606397] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.606397] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.606397] vgaarb: loaded
[    0.606397] pps_core: LinuxPPS API ver. 1 registered
[    0.606397] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.606397] PTP clock support registered
[    0.606975] PCI: Using ACPI for IRQ routing
[    0.606975] PCI: pci_cache_line_size set to 64 bytes
[    0.606975] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.606975] e820: reserve RAM buffer [mem 0xda85e000-0xdbffffff]
[    0.606975] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.608847] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.608912] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.610996] clocksource: Switched to clocksource tsc-early
[    0.610996] VFS: Disk quotas dquot_6.6.0
[    0.610996] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.610996] pnp: PnP ACPI init
[    0.610996] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[    0.610996] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.610996] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.610996] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.610996] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.610996] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.610996] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.610996] system 00:04: [io  0x0400-0x0453] has been reserved
[    0.610996] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.610996] system 00:04: [io  0x1180-0x119f] has been reserved
[    0.610996] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.610996] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.610996] system 00:04: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.610996] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.610996] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.610996] system 00:05: [io  0x0454-0x0457] has been reserved
[    0.610996] pnp: PnP ACPI: found 6 devices
[    0.610996] PnPBIOS: Disabled
[    0.645749] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.645867] NET: Registered PF_INET protocol family
[    0.645965] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.646299] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.646895] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.646956] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.647024] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.647096] TCP: Hash tables configured (established 8192 bind 8192)
[    0.647171] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.647233] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.647327] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.647398] pci 0000:01:00.0: PCI bridge to [bus 02]
[    0.647483] pci 0000:00:1c.0: PCI bridge to [bus 01-02]
[    0.647549] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.647608] pci 0000:00:1c.1:   bridge window [mem 0xfe400000-0xfe5fffff]
[    0.647673] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.647732] pci 0000:00:1c.3:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.647805] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.647864] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.647922] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.647979] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.648037] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.648095] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.648154] pci_bus 0000:00: resource 10 [mem 0xdfa00000-0xffffffff window]
[    0.648213] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe5fffff]
[    0.648271] pci_bus 0000:04: resource 1 [mem 0xfe600000-0xfe6fffff]
[    0.648388] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    0.648843] PCI: CLS 64 bytes, default 64
[    0.648953] Trying to unpack rootfs image as initramfs...
[    0.655850] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    0.655916] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    0.655972] RAPL PMU: hw unit of domain package 2^-16 Joules
[    0.656029] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    0.656593] Initialise system trusted keyrings
[    0.656902] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[    0.658794] xor: measuring software checksum speed
[    0.659551]    pIII_sse        : 14095 MB/sec
[    0.660253]    prefetch64-sse  : 15478 MB/sec
[    0.660308] xor: using function: prefetch64-sse (15478 MB/sec)
[    0.660366] async_tx: api initialized (async)
[    0.660421] Key type asymmetric registered
[    0.660475] Asymmetric key parser 'x509' registered
[    0.660545] bounce: pool size: 64 pages
[    0.660614] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.660785] io scheduler mq-deadline registered
[    0.661459] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24
[    0.661703] pcieport 0000:00:1c.1: PME: Signaling with IRQ 25
[    0.661874] pcieport 0000:00:1c.3: PME: Signaling with IRQ 26
[    0.662736] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.662801] ACPI: button: Power Button [PWRB]
[    0.662902] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.662963] ACPI: button: Power Button [PWRF]
[    0.667902] isapnp: Scanning for PnP cards...
[    0.928298] Freeing initrd memory: 12104K
[    0.928525] kworker/u4:2 (111) used greatest stack depth: 6656 bytes left
[    0.931991] kworker/u4:2 (60) used greatest stack depth: 6600 bytes left
[    0.932182] kworker/u4:1 (52) used greatest stack depth: 6520 bytes left
[    1.022913] isapnp: No Plug & Play device found
[    1.037147] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.038387] Non-volatile memory driver v1.3
[    1.040734] brd: module loaded
[    1.040949] i8042: PNP: No PS/2 controller found.
[    1.041004] i8042: Probing ports directly.
[    1.044132] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.044200] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.044376] mousedev: PS/2 mouse device common for all mice
[    1.044456] rtc_cmos 00:02: RTC can wake from S4
[    1.044728] rtc_cmos 00:02: registered as rtc0
[    1.044819] rtc_cmos 00:02: setting system clock to 2023-03-26T15:42:18 UTC (1679845338)
[    1.044908] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[    1.045213] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    1.045281] intel_pstate: Intel P-state driver initializing
[    1.045599] Initializing XFRM netlink socket
[    1.045663] NET: Registered PF_PACKET protocol family
[    1.045731] NET: Registered PF_KEY protocol family
[    1.045893] Key type dns_resolver registered
[    1.046200] microcode: sig=0x206a7, pf=0x2, revision=0x2f
[    1.046274] microcode: Microcode Update Driver: v2.2.
[    1.046279] IPI shorthand broadcast: enabled
[    1.046435] sched_clock: Marking stable (1037482261, 8339520)->(1274773715, -228951934)
[    1.046659] registered taskstats version 1
[    1.046718] Loading compiled-in X.509 certificates
[    1.671793] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[    1.671867] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45085418, max_idle_ns: 440795285711 ns
[    1.671993] clocksource: Switched to clocksource tsc
[    4.199813] floppy0: no floppy controllers found
[    4.200126] Freeing unused kernel image (initmem) memory: 616K
[    4.216040] Write protecting kernel text and read-only data: 9212k
[    4.216113] Run /init as init process
[    4.216171]   with arguments:
[    4.216172]     /init
[    4.216173]   with environment:
[    4.216174]     HOME=/
[    4.216175]     TERM=linux
[    4.216176]     BOOT_IMAGE=../kernel
[    4.224251] systemd[1]: Inserted module 'autofs4'
[    4.226382] NET: Registered PF_INET6 protocol family
[    4.237826] modprobe (749) used greatest stack depth: 6512 bytes left
[    4.248480] Segment Routing with IPv6
[    4.248545] RPL Segment Routing with IPv6
[    4.248634] In-situ OAM (IOAM) with IPv6
[    4.273117] systemd[1]: systemd 251.2 running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    4.273297] systemd[1]: Detected architecture x86.
[    4.273361] systemd[1]: Running in initial RAM disk.
[    4.273929] systemd[1]: Hostname set to <eis>.
[    4.283231] systemd-hiberna (765) used greatest stack depth: 6328 bytes left
[    4.364563] systemd[1]: Queued start job for default target Initrd Default Target.
[    4.365023] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.365451] systemd[1]: Reached target Initrd /usr File System.
[    4.365713] systemd[1]: Reached target Local File Systems.
[    4.365967] systemd[1]: Reached target Path Units.
[    4.366242] systemd[1]: Reached target Slice Units.
[    4.366506] systemd[1]: Reached target Swaps.
[    4.366752] systemd[1]: Reached target Timer Units.
[    4.367171] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.367600] systemd[1]: Listening on Journal Socket.
[    4.368078] systemd[1]: Listening on udev Control Socket.
[    4.368489] systemd[1]: Listening on udev Kernel Socket.
[    4.368761] systemd[1]: Reached target Socket Units.
[    4.371060] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
[    4.375559] systemd[1]: Starting Create List of Static Device Nodes...
[    4.375938] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[    4.376023] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[    4.376865] systemd[1]: Starting Journal Service...
[    4.377257] systemd[1]: Load Kernel Modules was skipped because all trigger condition checks failed.
[    4.378185] systemd[1]: Starting Apply Kernel Variables...
[    4.379145] systemd[1]: Starting Setup Virtual Console...
[    4.385276] systemd[1]: Finished Apply Kernel Variables.
[    4.396131] systemd[1]: Finished Create List of Static Device Nodes.
[    4.398418] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.404583] systemd[1]: Finished Create Static Device Nodes in /dev.
[    4.416225] systemd[1]: Finished Setup Virtual Console.
[    4.417322] systemd[1]: Starting dracut ask for additional cmdline parameters...
[    4.422043] systemd[1]: Started Journal Service.
[    4.693781] udevadm (885) used greatest stack depth: 6208 bytes left
[    4.736882] ACPI: bus type USB registered
[    4.736977] usbcore: registered new interface driver usbfs
[    4.737042] usbcore: registered new interface driver hub
[    4.737116] usbcore: registered new device driver usb
[    4.737480] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.737678] ehci-pci: EHCI PCI platform driver
[    4.738375] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    4.738437] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    4.738508] ehci-pci 0000:00:1a.0: debug port 2
[    4.742491] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe723000
[    4.750164] SCSI subsystem initialized
[    4.754434] libata version 3.00 loaded.
[    4.755154] ahci 0000:00:1f.2: version 3.0
[    4.756033] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    4.756160] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    4.756224] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.756284] usb usb1: Product: EHCI Host Controller
[    4.756340] usb usb1: Manufacturer: Linux 5.15.102-eisfair-1-SMP ehci_hcd
[    4.756398] usb usb1: SerialNumber: 0000:00:1a.0
[    4.756877] hub 1-0:1.0: USB hub found
[    4.765406] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x37 impl SATA mode
[    4.765476] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst 
[    4.771869] hub 1-0:1.0: 2 ports detected
[    4.772215] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    4.772276] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    4.772348] ehci-pci 0000:00:1d.0: debug port 2
[    4.776330] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe722000
[    4.795799] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    4.795912] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    4.795975] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.796036] usb usb2: Product: EHCI Host Controller
[    4.796092] usb usb2: Manufacturer: Linux 5.15.102-eisfair-1-SMP ehci_hcd
[    4.796151] usb usb2: SerialNumber: 0000:00:1d.0
[    4.796382] hub 2-0:1.0: USB hub found
[    4.800933] hub 2-0:1.0: 2 ports detected
[    4.808159] uhci_hcd: USB Universal Host Controller Interface driver
[    4.808564] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.809134] ohci-pci: OHCI PCI platform driver
[    4.813496] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    4.813561] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    4.813744] xhci_hcd 0000:04:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[    4.814052] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    4.814118] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    4.814180] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed
[    4.824971] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    4.825039] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.825099] usb usb3: Product: xHCI Host Controller
[    4.825155] usb usb3: Manufacturer: Linux 5.15.102-eisfair-1-SMP xhci-hcd
[    4.825213] usb usb3: SerialNumber: 0000:04:00.0
[    4.825953] hub 3-0:1.0: USB hub found
[    4.826085] hub 3-0:1.0: 2 ports detected
[    4.826370] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.826563] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    4.826627] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.826687] usb usb4: Product: xHCI Host Controller
[    4.826743] usb usb4: Manufacturer: Linux 5.15.102-eisfair-1-SMP xhci-hcd
[    4.826802] usb usb4: SerialNumber: 0000:04:00.0
[    4.837674] scsi host0: ahci
[    4.839254] hub 4-0:1.0: USB hub found
[    4.840507] hub 4-0:1.0: 2 ports detected
[    4.843969] scsi host1: ahci
[    4.847842] scsi host2: ahci
[    4.851887] scsi host3: ahci
[    4.859290] scsi host4: ahci
[    4.863935] scsi host5: ahci
[    4.864064] ata1: SATA max UDMA/133 abar m2048@0xfe721000 port 0xfe721100 irq 27
[    4.864138] ata2: SATA max UDMA/133 abar m2048@0xfe721000 port 0xfe721180 irq 27
[    4.864199] ata3: SATA max UDMA/133 abar m2048@0xfe721000 port 0xfe721200 irq 27
[    4.864259] ata4: DUMMY
[    4.864310] ata5: SATA max UDMA/133 abar m2048@0xfe721000 port 0xfe721300 irq 27
[    4.864370] ata6: SATA max UDMA/133 abar m2048@0xfe721000 port 0xfe721380 irq 27
[    4.881815] random: crng init done
[    5.027811] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    5.055768] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    5.178014] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.178097] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.178832] ata3.00: ATA-8: WDC WD5000AACS-00G8B1, 05.04C05, max UDMA/133
[    5.178980] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    5.179178] ata2.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OAA10, max UDMA/133
[    5.179449] ata2.00: ATA Identify Device Log not supported
[    5.179507] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    5.180077] ata3.00: configured for UDMA/133
[    5.180890] ata2.00: ATA Identify Device Log not supported
[    5.180949] ata2.00: configured for UDMA/133
[    5.181895] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.181967] ata5: SATA link down (SStatus 0 SControl 300)
[    5.182224] ata1.00: ATA-9: SanDisk SDSSDRC032G, 2.0.0, max UDMA/133
[    5.182283] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 32)
[    5.182535] ata1.00: configured for UDMA/133
[    5.182700] scsi 0:0:0:0: Direct-Access     ATA      SanDisk SDSSDRC0 0    PQ: 0 ANSI: 5
[    5.183006] scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDS5C302 AA10 PQ: 0 ANSI: 5
[    5.183252] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AACS-0 4C05 PQ: 0 ANSI: 5
[    5.190124] ata6: SATA link down (SStatus 0 SControl 300)
[    5.192087] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    5.192150] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.204314] hub 1-1:1.0: USB hub found
[    5.204463] hub 1-1:1.0: 6 ports detected
[    5.207052] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    5.207163] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    5.207227] sd 1:0:0:0: [sdb] Write Protect is off
[    5.207280] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.207288] sd 0:0:0:0: [sda] Write Protect is off
[    5.207341] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.207356] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.207440] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.214920] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    5.215003] sd 2:0:0:0: [sdc] Write Protect is off
[    5.215058] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    5.215073] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.215382]  sda: sda1 sda2
[    5.215612] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.216019]  sdb: sdb1
[    5.216093] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    5.216153] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.216500] sd 1:0:0:0: [sdb] Attached SCSI disk
[    5.216745] hub 2-1:1.0: USB hub found
[    5.216836] hub 2-1:1.0: 8 ports detected
[    5.226335]  sdc: sdc1
[    5.226562] sd 2:0:0:0: [sdc] Attached SCSI disk
[    5.499775] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[    5.503926] usb 2-1.4: new high-speed USB device number 3 using ehci-pci
[    5.612090] usb 1-1.4: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
[    5.612166] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.612496] hub 1-1.4:1.0: USB hub found
[    5.612584] hub 1-1.4:1.0: 4 ports detected
[    5.620349] usb 2-1.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    5.620427] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    5.620490] usb 2-1.4: Product: USB 2.0 Hub
[    5.620875] hub 2-1.4:1.0: USB hub found
[    5.621084] hub 2-1.4:1.0: 4 ports detected
[    5.641849] fsck (2025) used greatest stack depth: 5976 bytes left
[    5.661137] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    5.899773] usb 1-1.4.4: new full-speed USB device number 4 using ehci-pci
[    6.007762] usb 2-1.4.4: new high-speed USB device number 4 using ehci-pci
[    6.008473] usb 1-1.4.4: New USB device found, idVendor=0557, idProduct=8021, bcdDevice= 1.00
[    6.008545] usb 1-1.4.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.009996] hub 1-1.4.4:1.0: USB hub found
[    6.010691] hub 1-1.4.4:1.0: 4 ports detected
[    6.299795] usb 1-1.4.4.1: new full-speed USB device number 5 using ehci-pci
[    6.345398] systemd-udevd (1028) used greatest stack depth: 5448 bytes left
[    6.364204] systemd-udevd (1024) used greatest stack depth: 5136 bytes left
[    6.443145] usb 1-1.4.4.1: New USB device found, idVendor=046a, idProduct=c092, bcdDevice= 1.00
[    6.443234] usb 1-1.4.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.443295] usb 1-1.4.4.1: Product: CHERRY Wireless Device
[    6.443353] usb 1-1.4.4.1: Manufacturer: Cherry GmbH
[    6.474940] systemd-journald[802]: Received SIGTERM from PID 1 (systemd).
[    6.727107] systemd[1]: systemd 251.2 running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    6.727299] systemd[1]: Detected architecture x86.
[    6.778197] systemd-fstab-generator[2089]: Mount point iso9660 is not a valid path, ignoring.
[    6.778283] systemd-fstab-generator[2089]: Mount point auto is not a valid path, ignoring.
[    6.778347] systemd-fstab-generator[2089]: Mount point auto is not a valid path, ignoring.
[    6.778412] systemd-fstab-generator[2089]: Mount point auto is not a valid path, ignoring.
[    6.778476] systemd-fstab-generator[2089]: Mount point auto is not a valid path, ignoring.
[    6.779836] systemd-sysv-generator[2097]: SysV service '/etc/init.d/lcd4linux' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.780957] systemd-sysv-generator[2097]: SysV service '/etc/init.d/bonding' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.781154] systemd-sysv-generator[2097]: SysV service '/etc/init.d/ntp' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.781335] systemd-sysv-generator[2097]: SysV service '/etc/init.d/nico' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.782798] systemd-sysv-generator[2097]: SysV service '/etc/init.d/deviceagent' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.783004] systemd-sysv-generator[2097]: SysV service '/etc/init.d/autohalt' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.784423] systemd-sysv-generator[2097]: SysV service '/etc/init.d/epgd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.786064] systemd-sysv-generator[2097]: SysV service '/etc/init.d/lprng' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.786269] systemd-sysv-generator[2097]: SysV service '/etc/init.d/anacron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.787848] systemd-sysv-generator[2097]: SysV service '/etc/init.d/logsave' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.788052] systemd-sysv-generator[2097]: SysV service '/etc/init.d/smartmon' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.788247] systemd-sysv-generator[2097]: SysV service '/etc/init.d/ip-eth' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.788453] systemd-sysv-generator[2097]: SysV service '/etc/init.d/wakeup' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.788643] systemd-sysv-generator[2097]: SysV service '/etc/init.d/xinetd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.788833] systemd-sysv-generator[2097]: SysV service '/etc/init.d/ssh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.789029] systemd-sysv-generator[2097]: SysV service '/etc/init.d/smbfs' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.789221] systemd-sysv-generator[2097]: SysV service '/etc/init.d/rc' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.789423] systemd-sysv-generator[2097]: SysV service '/etc/init.d/resolv' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.789621] systemd-sysv-generator[2097]: SysV service '/etc/init.d/single' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.791002] systemd-sysv-generator[2097]: SysV service '/etc/init.d/fuse' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.791196] systemd-sysv-generator[2097]: SysV service '/etc/init.d/vdr' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.791391] systemd-sysv-generator[2097]: SysV service '/etc/init.d/hddtemp' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.791599] systemd-sysv-generator[2097]: SysV service '/etc/init.d/lm_sensors' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.791821] systemd-sysv-generator[2097]: SysV service '/etc/init.d/rpcbind' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.792033] systemd-sysv-generator[2097]: SysV service '/etc/init.d/netdate' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.792240] systemd-sysv-generator[2097]: SysV service '/etc/init.d/samba' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.792456] systemd-sysv-generator[2097]: SysV service '/etc/init.d/apache2' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.792679] systemd-sysv-generator[2097]: SysV service '/etc/init.d/phoneled' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.792872] systemd-sysv-generator[2097]: SysV service '/etc/init.d/route' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.793077] systemd-sysv-generator[2097]: SysV service '/etc/init.d/lprng.boot' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.793272] systemd-sysv-generator[2097]: SysV service '/etc/init.d/mariadb102' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.793462] systemd-sysv-generator[2097]: SysV service '/etc/init.d/halt' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.793674] systemd-sysv-generator[2097]: SysV service '/etc/init.d/reboot' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.793885] systemd-sysv-generator[2097]: SysV service '/etc/init.d/mdadm' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.794087] systemd-sysv-generator[2097]: SysV service '/etc/init.d/mountfs' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.794276] systemd-sysv-generator[2097]: SysV service '/etc/init.d/lo' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.794463] systemd-sysv-generator[2097]: SysV service '/etc/init.d/rsync' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.794654] systemd-sysv-generator[2097]: SysV service '/etc/init.d/nscd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.794843] systemd-sysv-generator[2097]: SysV service '/etc/init.d/usb' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.795633] systemd-sysv-generator[2097]: SysV service '/etc/init.d/iperf' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    6.839082] usb 2-1.4.4: New USB device found, idVendor=0bda, idProduct=0151, bcdDevice=51.95
[    6.839184] usb 2-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.839250] usb 2-1.4.4: Product: USB2.0-CRW
[    6.839309] usb 2-1.4.4: Manufacturer: Generic
[    6.839365] usb 2-1.4.4: SerialNumber: 20060413092100000
[    7.480480] systemd[1]: initrd-switch-root.service: Deactivated successfully.
[    7.480686] systemd[1]: Stopped Switch Root.
[    7.481376] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[    7.481937] systemd[1]: Created slice Slice /system/getty.
[    7.482527] systemd[1]: Created slice Slice /system/modprobe.
[    7.483106] systemd[1]: Created slice Slice /system/systemd-fsck.
[    7.483498] systemd[1]: Created slice User and Session Slice.
[    7.483783] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    7.484155] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.484418] systemd[1]: Reached target Local Encrypted Volumes.
[    7.484642] systemd[1]: Stopped target Switch Root.
[    7.484851] systemd[1]: Stopped target Initrd File Systems.
[    7.485040] systemd[1]: Stopped target Initrd Root File System.
[    7.485242] systemd[1]: Reached target Local Integrity Protected Volumes.
[    7.485465] systemd[1]: Reached target Network is Online.
[    7.485662] systemd[1]: Reached target Path Units.
[    7.485865] systemd[1]: Reached target Slice Units.
[    7.486079] systemd[1]: Reached target Swaps.
[    7.486290] systemd[1]: Reached target Local Verity Protected Volumes.
[    7.486584] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    7.486933] systemd[1]: Listening on udev Control Socket.
[    7.487242] systemd[1]: Listening on udev Kernel Socket.
[    7.487600] systemd[1]: Huge Pages File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[    7.488449] systemd[1]: Mounting POSIX Message Queue File System...
[    7.489571] systemd[1]: Mounting Kernel Debug File System...
[    7.489943] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
[    7.491395] systemd[1]: Starting Create List of Static Device Nodes...
[    7.493028] systemd[1]: Starting Load Kernel Module configfs...
[    7.494652] systemd[1]: Starting Load Kernel Module drm...
[    7.496710] systemd[1]: Starting Load Kernel Module fuse...
[    7.497329] systemd[1]: Stopped Journal Service.
[    7.497749] systemd[1]: Listening on Syslog Socket.
[    7.503855] systemd[1]: Starting Journal Service...
[    7.506988] systemd[1]: Load Kernel Modules was skipped because all trigger condition checks failed.
[    7.508946] fuse: init (API version 7.34)
[    7.510243] systemd[1]: Starting Remount Root and Kernel File Systems...
[    7.517761] systemd[1]: Starting Apply Kernel Variables...
[    7.523595] systemd[1]: Starting Coldplug All udev Devices...
[    7.538524] systemd[1]: Started Journal Service.
[    7.544237] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[    7.574469] systemd-journald[2109]: Received client request to flush runtime journal.
[    8.837595] e1000e: Intel(R) PRO/1000 Network Driver
[    8.837653] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    8.837860] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    8.881029] hid: raw HID events driver (C) Jiri Kosina
[    8.897595] usb-storage 2-1.4.4:1.0: USB Mass Storage device detected
[    8.898859] mc: Linux media interface: v0.10
[    8.904560] videodev: Linux video capture interface: v2.00
[    8.910124] scsi host6: usb-storage 2-1.4.4:1.0
[    8.910278] usbcore: registered new interface driver usb-storage
[    8.939740] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    8.940691] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    8.941172] i2c i2c-0: 2/4 memory slots populated (from DMI)
[    8.943212] i2c i2c-0: Successfully instantiated SPD at 0x51
[    8.944510] i2c i2c-0: Successfully instantiated SPD at 0x53
[    8.963959] usbcore: registered new interface driver uas
[    8.964307] usbcore: registered new interface driver usbhid
[    8.964366] usbhid: USB HID core driver
[    8.965951] Error: Driver 'pcspkr' is already registered, aborting...
[    8.979641] usbcore: registered new interface driver usbmouse
[    9.007239] usbcore: registered new interface driver usbkbd
[    9.033237] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    9.035566] i915 0000:00:02.0: vgaarb: deactivate vga console
[    9.036084] Console: switching to colour dummy device 80x25
[    9.072958] cx23885: cx23885 driver version 0.0.4 loaded
[    9.073092] cx23885: CORE cx23885[0]: subsystem: 4254:0982, board: DVBSky T982 [card=51,autodetected]
[    9.075130] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.127678] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    9.160332] fbcon: i915drmfb (fb0) is primary device
[    9.163192] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 38:60:77:1a:7b:f2
[    9.163197] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    9.163247] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[    9.257640] Console: switching to colour frame buffer device 240x67
[    9.280718] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    9.317506] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: errors=remount-ro. Quota mode: none.
[    9.317570] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[    9.339053] cx25840 11-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
[    9.385737] cx25840 11-0044: Direct firmware load for v4l-cx23885-avcore-01.fw failed with error -2
[    9.385798] cx25840 11-0044: unable to open firmware v4l-cx23885-avcore-01.fw
[    9.392517] iTCO_vendor_support: vendor-support=0
[    9.393606] iTCO_wdt iTCO_wdt.1.auto: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    9.393745] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[    9.400142] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
[    9.400181] cx23885: cx23885[0]: cx23885 based dvb card
[    9.411839] input: Cherry GmbH CHERRY Wireless Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4.1/1-1.4.4.1:1.0/0003:046A:C092.0001/input/input6
[    9.422256] at24 0-0051: supply vcc not found, using dummy regulator
[    9.424549] at24 0-0051: 256 byte spd EEPROM, read-only
[    9.424618] at24 0-0053: supply vcc not found, using dummy regulator
[    9.425227] at24 0-0053: 256 byte spd EEPROM, read-only
[    9.437128] i2c i2c-10: Added multiplexed i2c bus 12
[    9.437163] si2168 10-0064: Silicon Labs Si2168-A30 successfully identified
[    9.437194] si2168 10-0064: firmware version: A 3.0.2
[    9.463864] EXT4-fs (sdc1): warning: checktime reached, running e2fsck is recommended
[    9.467378] si2157 12-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
[    9.467438] dvbdev: DVB: registering new adapter (cx23885[0])
[    9.467465] cx23885 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[    9.472058] hid-generic 0003:046A:C092.0001: input,hidraw0: USB HID v1.11 Keyboard [Cherry GmbH CHERRY Wireless Device] on usb-0000:00:1a.0-1.4.4.1/input0
[    9.472429] input: Cherry GmbH CHERRY Wireless Device Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4.1/1-1.4.4.1:1.1/0003:046A:C092.0002/input/input7
[    9.472638] input: Cherry GmbH CHERRY Wireless Device Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4.1/1-1.4.4.1:1.1/0003:046A:C092.0002/input/input8
[    9.478506] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: errors=remount-ro. Quota mode: none.
[    9.514289] cx23885: DVBSky T982 port 1 MAC address: 00:17:42:54:09:87
[    9.514295] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
[    9.514297] cx23885: cx23885[0]: cx23885 based dvb card
[    9.532062] input: Cherry GmbH CHERRY Wireless Device System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4.1/1-1.4.4.1:1.1/0003:046A:C092.0002/input/input9
[    9.540969] input: Cherry GmbH CHERRY Wireless Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4.1/1-1.4.4.1:1.1/0003:046A:C092.0002/input/input10
[    9.545660] hid-generic 0003:046A:C092.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Cherry GmbH CHERRY Wireless Device] on usb-0000:00:1a.0-1.4.4.1/input1
[    9.552547] input: Cherry GmbH CHERRY Wireless Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4.1/1-1.4.4.1:1.2/0003:046A:C092.0003/input/input11
[    9.552896] i2c i2c-9: Added multiplexed i2c bus 13
[    9.556954] si2168 9-0064: Silicon Labs Si2168-A30 successfully identified
[    9.557695] hid-generic 0003:046A:C092.0003: input,hidraw2: USB HID v1.10 Mouse [Cherry GmbH CHERRY Wireless Device] on usb-0000:00:1a.0-1.4.4.1/input2
[    9.559172] si2168 9-0064: firmware version: A 3.0.2
[    9.577007] si2157 13-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
[    9.577033] dvbdev: DVB: registering new adapter (cx23885[0])
[    9.577037] cx23885 0000:03:00.0: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)...
[    9.641683] cx23885: DVBSky T982 port 2 MAC address: 00:17:42:54:09:88
[    9.644050] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa5
[    9.646395] cx23885: cx23885[0]/0: found at 0000:03:00.0, rev: 4, irq: 17, latency: 0, mmio: 0xfe400000
[    9.934332] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[    9.944343] scsi 6:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[    9.954319] scsi 6:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[    9.963565] scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[    9.966946] sd 6:0:0:0: [sdd] Media removed, stopped polling
[    9.972321] sd 6:0:0:1: [sde] Media removed, stopped polling
[    9.975446] sd 6:0:0:2: [sdf] Media removed, stopped polling
[    9.979953] sd 6:0:0:1: [sde] Attached SCSI removable disk
[    9.987831] sd 6:0:0:2: [sdf] Attached SCSI removable disk
[    9.991699] sd 6:0:0:3: [sdg] Media removed, stopped polling
[    9.994826] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[   10.025325] sd 6:0:0:3: [sdg] Attached SCSI removable disk
[   38.374042] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro. Quota mode: none.